August 29, 2026
Seattle DADU Zoning Guide 2026: What Every Homeowner Needs to Know
Seattle's Zoning Code Is Your Starting Point — Not an Obstacle
Every DADU project in Seattle begins with the same foundation: the city's Land Use Code. This is the body of rules that governs what you can build, where you can build it, and how large it can be. Understanding these rules is not optional — it is the prerequisite for every decision that follows, from site selection to architectural design to permit application.
The good news is that Seattle's DADU zoning rules are among the most permissive in the country. The city has been actively liberalizing its ADU regulations for years, and the current code reflects a genuine commitment to allowing homeowners to add density to their lots. Most Seattle single-family lots can support a DADU of meaningful size.
The challenge is that the rules are detailed, site-specific, and interconnected. A change in one variable — your lot size, your existing coverage, your roof style — can cascade into changes in what you are allowed to build. This guide covers every major zoning rule that applies to Seattle DADUs in 2026.
Zoning Districts: Where DADUs Are Allowed
DADUs are permitted in Seattle's residential zones, which are designated NR1, NR2, and NR3 (Neighborhood Residential). These zones cover the vast majority of Seattle's single-family residential land.
NR1 is the lowest-density zone, typically found in neighborhoods with larger lots and more suburban character. NR2 and NR3 allow slightly higher density and are found throughout Seattle's established neighborhoods.
DADUs are also permitted in some Lowrise zones (LR1, LR2, LR3) and in certain other residential designations. If your property is in a Lowrise zone, the applicable rules may differ from the standard NR zone requirements described in this guide — a zoning analysis specific to your property is essential.
Properties in Seattle's shoreline jurisdiction — generally within 200 feet of Puget Sound, Lake Washington, Lake Union, or other regulated water bodies — are subject to additional Shoreline Master Program requirements that apply on top of standard zoning rules. If your property is near water, your feasibility analysis must address both sets of regulations.
Lot Coverage: The Footprint Limit
Lot coverage is the total percentage of your lot that can be covered by structures — your house, garage, DADU, covered patios, and any other roofed structures. In Seattle's NR zones, the lot coverage rules work as follows.
For lots 5,000 square feet or larger, total lot coverage cannot exceed 35% of the lot area. For a 6,000 square foot lot, that means a maximum of 2,100 square feet of total structure footprint. If your existing house and garage already cover 1,600 square feet, you have 500 square feet of lot coverage remaining for a DADU.
For lots under 5,000 square feet, the formula is more generous: you can cover 1,000 square feet plus 15% of the total lot area. For a 4,000 square foot lot, that works out to 1,600 square feet of allowable coverage.
Regardless of lot size, Seattle caps the DADU itself at a maximum gross floor area of 1,000 square feet, not counting a ground-floor garage parking space. This is an absolute limit — no exceptions.
Calculating your existing lot coverage accurately is one of the most important steps in a feasibility analysis. Many homeowners underestimate their existing coverage because they forget to include covered patios, detached garages, or sheds. A professional survey and coverage calculation is the only reliable way to know exactly how much room you have.
Setbacks: The Mandatory Open Space Rules
Setbacks are the minimum distances that must be maintained between a structure and your property lines. For a DADU in Seattle's NR zones, the standard setback requirements are as follows.
Front yard: DADUs cannot be located in the front yard. The DADU must be positioned behind the primary residence.
Side yard setbacks: minimum of 5 feet from each side property line.
Rear yard setback: minimum of 5 feet from the rear property line. Exception: if your property backs up to a public alley, you can build your DADU with a 0-foot rear setback — right up to the rear property line — provided there are no overhead power line conflicts.
The 10-Foot Building Separation Rule: this is separate from the setback requirements and is one of the most commonly misunderstood rules in Seattle DADU zoning. There must be a minimum of 10 feet of clear separation between the exterior walls of your primary residence and the new DADU. This is measured from the closest points of the two structures — not from the center of either building. It is a strict fire safety requirement and is entirely non-negotiable.
Power line clearances add another layer of complexity. Seattle City Light enforces radial clearance zones around overhead high-voltage distribution lines. If your backyard has overhead power lines, your DADU must maintain a minimum clearance — typically 10 to 14 feet — from those lines. This can significantly constrain your buildable area.
Height Limits: How Tall Can You Build?
Seattle's DADU height limits depend on two variables: your lot width and your chosen roof style. The rules are designed to allow taller structures on wider lots while limiting the visual impact of DADUs on narrower lots.
For lots with a standard width of 30 feet or more, the general height limits are as follows. A flat or shed roof: maximum height of 14 to 16 feet, depending on lot width. This is ideal for a single-story DADU with high interior ceilings, or for a rooftop deck. A gabled or pitched roof: maximum height of 18 to 20 feet, depending on lot width. This allows for a two-story DADU or a loft-style bedroom above a main-floor living area.
If your DADU takes advantage of the maximum allowable height, the city may require increased side setbacks. This is a trade-off worth understanding before you commit to a design direction — a taller structure may require more side yard clearance, which reduces your buildable footprint.
For lots narrower than 30 feet, height limits are more restrictive. A feasibility analysis will identify the specific limits that apply to your lot.
Tree Protection, Critical Areas, and Other Site-Specific Rules
Beyond the core zoning rules, several site-specific regulations can affect DADU feasibility on Seattle lots.
Tree Protection: Seattle's Tree and Vegetation Protection ordinance requires retention of exceptional trees — generally those 24 inches or more in diameter at breast height — and establishes critical root zones that restrict where structures and heavy equipment can be placed. If your backyard has mature trees, their location and root zones are a key feasibility variable.
Critical Areas: Seattle's critical areas regulations protect environmentally sensitive areas including steep slopes, wetlands, streams, and landslide hazard zones. If your property contains or is adjacent to a critical area, additional setbacks and development restrictions may apply.
Easements: utility easements, access easements, and other encumbrances on your property title can restrict where structures can be built. A title review is an important part of any thorough feasibility analysis.
Historic Districts: properties in Seattle's historic districts or on the city's historic register may be subject to design review requirements that affect the appearance and materials of a DADU.
All of these variables are site-specific — they depend on the particular characteristics of your lot, not just your zoning district. A thorough feasibility analysis examines all of them and gives you a complete picture of what you can build before you invest in design. At DADU Solutions, that analysis is what our $1,900 Pre-Design Feasibility Study delivers — and it is the foundation of every successful Seattle DADU project.